Life and environment of mesh belt

The service life of ordinary mesh belt is very short compared with stainless steel mesh belt, because our use environment is very complex, such as high temperature, corrosion and other environments. As we all know, the characteristics of stainless steel mesh belt are high temperature resistance, corrosion resistance and high strength. 1. in the case of ultra-high temperature of more than 400 ℃, the use of mesh belt in normal work, due to the heat of the conveying material caused by the temperature rise, the strength of the conveyor belt is gradually decreased with the rise of temperature. The use limit of the stainless steel mesh belt will depend on the temperature of the material and the rotating friction of the mesh belt and the temperature of the material. If the temperature exceeds 400 ℃, whether it will affect the service life of the stainless steel mesh belt, please consult the stainless steel mesh belt manufacturer. In general, the stainless steel mesh belt is resistant to high temperature, so it will not affect its service life at 400 ℃. However, due to different manufacturing processes, the service life of stainless steel mesh belts made by various manufacturers is different.

2024-04-25

Mesh belt production line technology throughout the packaging industry

The mesh belt production line is widely used in the production and processing of a variety of products, and also plays multiple roles. In the whole process of social circulation, packaging can also play the function of protecting, beautifying, publicizing and selling products, and improve the competitiveness of commodities. In the continuous and large-scale industrial production process, packaging is a process. Mesh belt production line technology runs through the entire packaging industry.

2024-04-25

The wear of the conveyor belt in the work will increase

Conveyor belt is a friction-driven machine that transports materials in a continuous manner. It can be used to form a material conveying process from the initial feeding point to the final discharge point on a certain conveying line. It can be used to transport both broken and loose materials and pieces of goods. In addition to pure material transportation, it can also cooperate with the requirements of the process in the production process of various industrial enterprises to form a rhythmic assembly line. The following small series for you to explain the impact of the service life of the metal mesh belt, I hope to help your work.

2024-04-25

Why does the mesh belt produce deviation during operation?

Mesh belt is widely used in heat treatment furnace, brazing furnace, sintering furnace and other tunnel furnace production conveyor line, in cleaning and drying, baking conveyor line is also widely used. The mesh belt sometimes deviated and caton beat during the conveying process. Below we analyze the causes of the above phenomenon.

2024-04-24

Chain type mesh belt chain using that way to connect more reasonable?

According to the physical properties of channel steel, we understand that it is characterized by large load-bearing weight and larger contact surface with the mesh belt. Therefore, if the conveying product has a large unit area weight and a wide mesh surface, channel steel connection should be used.

2024-04-23

Stainless steel mesh belt to replace the environment in time

If the stainless steel mesh belt is running in an environment that is not replaced in time, sometimes the large amount of swing of the intermediate wheel causes accelerated wear of the belt, sometimes the belt intermediate wheel is stuck and the belt is polished, and sometimes the belt intermediate wheel itself falls off, causing the belt to fall out of the groove. The generator and water pump air conditioning pump and other components that are necessary to initiate the engine power get the power source, causing the vehicle to break down and cannot run normally.

2024-04-23